See Larger Image

OTIS Tactical Gun Cleaning System Tool Kit

Price: $109.60

  • Weight:540g
  • Availability:In Stock
  • Brand:OTIS

Quantity:
The Otis Technology Breech-to-Muzzle Cleaning System is widely regarded by experts as the most advanced gun cleaning system in the world.  It offers many gun cleaning advancements and refinements developed for the military and competitive marksmen and hunters.  By cleaning Breech-to-Muzzle, dirt and fouling is pulled out the muzzle, not pushed back into the action gumming the trigger or causing malfunctions.  The patented all-caliber patches not only provide up to six passes per patch, but form a perfectly circular cleaning swab. Because the slotted tip with the patch is pulled through the chamber, it doesn't compress the patch against the side of the rod. Conventional rods will jam off-center, scraping the rifling in the process, and potentially ruining the bore. The 750 lb. pull strength of the Otis Memory-Flex rod allows you to tightly form the patch to the bore, actually cleaning it rather than just moving the dirt around. The tight patch is formed by being pulled through the chamber, compressing in the throat, and cleans the leading edge of the rifling; the edge that actually bears the stress of the rotating bullet. For shotguns, custom soft durometer plugs, ("patch savers") force the patch to the full diameter of the bore, cleaning the chamber, forcing cone, bore and choke -- all without having to disassemble the gun!

The principle components of the Otis System are so well built that they have a lifetime warranty! The circular all-caliber patches are made of 100% cotton, and unlike cheap synthetic patches are not dissolved by the bore solvent, turning into plastic gunk left on the rifling. The tight weave of these patches actually pulls metallic copper flake buildup out of the grooves rather than leaving fibers embedded along the bore. The SupraTine brushes are custom made with more and finer bristles than lesser brands. The belt-pack cases are made of ballistic nylon, with heavy-duty zippers. The Bore Obstruction Removers are designed to avoid deforming a stuck bullet and will gently force it out of the bore with multiple taps from the Memory-Flex rod. The Memory-Flex rod is nylon coated aircraft grade cable with compression welded fittings that will support over a quarter ton of pull force!

The Otis Premium Bore Cleanser is one of the most advanced cleaning solutions ever developed. It will clean, penetrate, lubricate and leave a protective coating on all metal surfaces, without damaging the surrounding wood or plastic components. The solid forged brass tips and brushes will not corrode or oxidize like aluminum. Aluminum oxide forms on aluminum rods, and like sandpaper will lap your bore with each pass, often followed by a significant loss of accuracy. It is silly to buy a $20,000 target rifle and then clean it with inferior components. You can clean your gun with the Otis system thousands of times without a brass component ever scratching your muzzle or bore. Each system comes with detailed information on how to properly clean and care for your firearm. Try the Otis System - it will last a lifetime, and you'll spend more time shooting and less time cleaning!

What started in a shoe polish tin called The Whole Kit & Caboodle, Otis has engineered into the most popular firearm cleaning system on the market today. The world famous Tactical Cleaning System was engineered for the shooter who has a variety of firearms. The Tactical Cleaning System is equipped to clean all rifles, pistols, shotguns, and in-line muzzleloaders. It has the essential tools to clean rifles .17 to .50 caliber, handguns .17 to .50 caliber, shotguns 410 to 12/10 gauge, and all in-line muzzleloaders. The system includes three Memory-Flex® cleaning rods with over 750lb tensile strength, three forged slotted brass tips, two obstruction removers to knock out obstructions such as mud, snow, or even a stuck bullet or case, T-handle for added comfort, .5oz. tube of Otis O85® Ultra Bore® cleaner, lubricant and preservative, all-caliber cotton cleaning patches for .223 caliber and larger, small caliber patches for .17 to .223 caliber, shotgun brush adapter and rubber patch savers® to get 360 degree coverage in your shotgun barrels, six high quality bore brushes, and a bore reflector/flag safety.

- Caliber/Gauge: .17 - .50 Caliber Rifles; .17 - .50 Caliber Pistols; 410 - 12/10 Gauge Shotguns; In-Line Muzzleloaders
- Weight:          0.62 lbs.
- Dimensions:     4” x 4” x 2.5”
- U.S. Made

NOTE: t-handle for small caliber is not included in this kit.small caliber t-handle

Gun Cleaning Tips
1. ALWAYS CLEAN FROM BREECH TO MUZZLE IN THE NATURAL DIRECTION OF THE BULLET.
When you fire your gun, the powder residue and dirt are in the barrel. The chamber and receiver are clean. If you run a brush or patch from the muzzle end you will push this dirt, residue, and moisture into the chamber and receiver. This is a major cause of stuck cases or problems with lever actions and auto-loading rifles and shotguns. If you push or pull a brush back toward the chamber, you will notice the brush will throw the debris from the bore back into the chamber and locking lugs.
 
2. CENTER THE TIP AND ROD. BE CAREFUL NOT TO LET EITHER RUB THE BORE.
All firearms record their history. This is the reason most people look down the barrel of a firearm. An experienced eye can tell the method of cleaning, the number of shots, and the gun maintenance applied to the firearm. Many marks are caused by people who carelessly let the tip or rod rub the inside the barrel.
 
3. USE A CLEAN PATCH SURFACE EACH TIME YOU GO DOWN THE BARREL.
This is similar to mopping a floor and rinsing the mop out. When you are using your firearm you will get abrasive dirt in the muzzle. The patch with solvent will flush this dirt out in the shortest distance. If you use this patch surface again, the dirt will be deposited in the chamber and neck. The next bullet down the barrel picks up this dirt and erodes the throat. This is the exact equivalent of cleaning in the wrong direction.
 
4. NEVER RUN A BRUSH IN THE BARREL FIRST.
This will damage the firearm. The brush will pick up dirt, moisture or powder residue and deposit it into the chamber or receiver. Never dip a brush in solvent. The solvent at the brush core will collect dirt and drop it into the receiver and chamber.
 
5. NEVER GO BACK AND FORTH REVERSING THE BRUSH.
This will bend the bristles on the brush. This is the equivalent of bending a wire back and forth until it breaks. You will always ruin a brush if you reverse it while in the bore.
6. USE ONLY A FEW DROPS OF SOLVENT / LUBRICANT. Many people think the more solvent the better. However, this will damage the firearm. Use only the solvent that the patch will absorb. If you see too much, the solvent or oil will drip down into the trigger mechanism. This will cause a gummy trigger. If you use too much oil, it will drain back toward the stock and cause premature failure of the wood.

   
   


To serve you in a more efficient while cost-effective way, shopping cart is available 24 hours a day online! All order will be processed and shipped as quickly as possible. Generally, processing time is usually 0-1 working day for stocked items.

If you are not comfortable with shopping online, simply drop an e-mail with the item name, quantity that you are after and physical delivery address. We will get back to you within 24 hours.

Please note that order has already been shipped out cannot be revised or cancelled.

All prices are shown in Australian Dollars; do not accept other currency.

Generally, Fusion Gear accepts the following forms of payment.

    -    Paypal
    -    Bank Transfers/Direct Deposit
    -    Credit Card (visa/mastercard/debit card) * do NOT accept credit card from international customers.

Generally, all orders will be shipped on the same working day upon receipt of cleared payment by received before 2pm ACST. Whilst all orders are processed and shipped as quickly as possible; Fusion Gear is not liable for any consequential losses caused by late delivery.

Estimated arrival dates are a general guideline, not guaranteed, which is subject to a range of factors, including mailing address, availability of the item(s) ordered, payment & shipping method, weather and/or other unforeseen circumstances.

Buyer who places an order with incorrect information is liable for all aspects of shipping costs and will only be refunded the value of the goods only NOT the subsequent carriage costs. Should redelivery be required, postage is ought to be collected prior to shipment.

To international buyers, Fusion Gear is able to provide the shipping date and customs declaration reference number; provides no tracking information as international parcels cannot be tracked after leaving Australia (except Express Courier). It is highly recommended that international buyer get themselves familiar with the local importation requirements and restrictions, who is solely responsible for payment of applicable duties, taxes and other fees if applicable. Fusion Gear does not assume liability for fees/taxes/expenses incurred during the importation of products and does not refund for packages seized by customs or unclaimed at customs.

Because of the large volume of products shipped each day, it is impossible for Fusion Gear to check each and every individual item prior to shipping. As such, every item is assumed to have left the factory in function, undamaged condition. Should an item is damaged, defective, or need warranty repair, the Buyer is obliged to notify FUSION GEAR of the intended replacement at first place and return within 10 days as of the invoice date, ensure all items returned appropriately packed.

The item(s) in return shall be in: BRAND NEW, UNUSED, UNCARRIED, UNDAMAGED CONDITION WITH ORIGINAL PACK with all materials, instructions, paperwork and proof of purchase, there are certain items may not accept return, for instance hydration equipment and factory second etc though. Buyer bears any cost relating to return/replacement.

Fusion Gear will send the replacement or refund to the Buyer whichever the case applies within 2 working days upon receipt of the faulty goods returned in good order that are not exhibited damage or non-functional as a result of improper use or treatment or modification beyond specification.

Fusion Gear does not accept returns for no reason simply as an example "changed my mind". Australian Consumer Law (ACL) provides the Buyer with statutory rights and consumer guarantees. The Return Policy is in addition to your rights and remedies you may have under the ACL.

For more details on return/warranty, simply go to Return Policy; or drop us an e-mail info(at)fusiongear.com.au.

Oops, nothing yet. Be the first to write a review.
Write Review

Copyright © 2017 Fusion Gear